RETURN TO HOME PAGE
Fill in as much of the following information as possible regarding your current-measuring requirement, then submit it.
You can also print out the form and send by post or fax.
Customer Enquiry Form
If you have a digital image of the waveform then please attach it to a separate e-mail.
Or send a hard copy by post to our address below.
Please note - pressing the Return / Enter key during data entry, will submit this form.
Mechanical
Maximum outside diameter (mm)
Maximum thickness (mm)
Minimum necessary internal diameter (mm)
Type of mounting (with or without feet)
Note: A limited range of split core ring-type designs are available for applications where it is not practical to thread the conductor through the instrument. Some accessories are also available to facilitate bus bar mounting. Other accessories include BNC cables and 50R feed through resistors for the broadband range.
Sinusoidal Waveform
Frequency (Hz)
Peak primary current (amps)
Corresponding peak secondary current (amps)
Class or accuracy (%)
Burden or load impedance of the recording instrument (VA or ohms)
Non-sinusoidal Waveform
Repetition rate, pulses per second or single shot
Mean DC component of primary current (amps)
I-t value of pulse waveform (amp seconds)
I-t capability can be enhanced or transformer size can be reduced by the application of a DC bias or reset pulse
Can the application of a dc bias or a reset pulse be considered?
Voltage sensitivity, voltage output per amp of primary current (V/A)
Low frequency 3dB cut-off point (Hz)
High frequency 3dB cut-off point (Hz)
Accuracy required (+/- %)
Contact information
Name
Company
email
Address 1
Address 2
Town/City
Postcode/ZIP
Country
Telephone
Message or other relevant information
Lilco Ltd., Diamond House, Stenness, Orkney, KW16 3JX, United Kingdom
Tel No UK: 01234 781990
International: +44 1234 781990
e-mail:
